IEC60695-2-10 Flammability Testing Equipment With Ni77/Cr20 Glowing Filament
Introduction: Flammability Testing Equipment
The Glow-wire ignition Temperature(GWIT)is to be assigned as the temperature which is 25°C (45°F) higher than that temperature of the tip of the glow-wire which does not cause ignition during three consecutive tests.
Either during normal operation , under unusual conditions , or as a result of malfunctions , some components of an electrical apparatus , such as wires or other conductors may become abnormally hot.
When these overheated parts are in intimate contact with the insulating matmay occur . This test is intended to determine the relative ignitability of insulating materials under these conditions. Flammability Testing Equipment
Standard:IEC60695-2-10, IEC60695-2-13 and UL746A.
Application:This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in a short time. It is suitable for electric and electronic products, household appliances and other material to do fire hazard testing. It is also used in the No flame ignition source fire test to test initiation temperature and flammability index of related glowing filament.
Test sample:Electrical equipment and its components and parts, solid electrical insulating materials and other solid combustible materials. Flammability Testing Equipment
Feature: This equipment adopts a new design concept, while in the realization of accurate positioning, but also to achieve the rapid adjustment after replacing the sample, truly meet the requirement of easy and convenient operation; The control system adopts PLC and touch screen control, each parameter can reflect the real situation of the relevant parameters more timely and accurately, and the operation is intuitive and convenient, so as to meet the needs of scientific research Flammability Testing Equipment
Parameters:
| ParametersModel | GW-2(Touch screen) |
| Working voltage | 220V/50Hz |
| Control operation mode | PLC control, 7 inch color touch screen operation, with infrared remote control |
| Glowing filament | Ф4mm ± 0.04mm (> 77 % Ni/20 ± 1 % Cr) special standard ring shape,horizontal standing |
| Specimen pressure on glowing filament | 0.95N±0.1N |
| Maximum depth of heating | 7mm ± 0.5mm Flammability Testing Equipment |
| Specimen movement speed | 10mm /s ～ 25mm /s |
| Temperature calibration | Calibration temperature:960°±10°C, the hot wire by electric heating |
| Thermocouple: RS imported 1mm armour nickel-chromium/nickel/ nickel aluminum K-Thermocouple, temperature resistance 1100° |
| Silver foil: purity 99.8%, area :2m², thickness:0.06mm |
| Tray | A layer of silk paper (12~30g/m³) is covered on the 10mm thick pine board, with a distance of 200±5mm below the test sample |
| Test chamber | >0.5 cube,sample distance from the inside of the box is greater than 100mm, black yogon background,background illuminance ≤ 20Lx,with exhaust fan |
| Testing time | 30s±1s Flammability Testing Equipment |
| Test procedure | The test sample is driven by the car and automatic run, the car will return automatically after glow-wire entered the test sample of 7mm |
| Lighting | Equip with lighting in the test chamber, with control |
| Dimension | 1100*550*1200mm,140kg |
Product Tags:
|
|
IEC60695-2-10 Flammability Testing Equipment With Ni77/Cr20 Glowing Filament Images
|
