Stainless Steel Wading Test Device Automatic Drain Depth Of 100mm

Stainless Steel Wading Test Device Automatic Drain Depth Of 100mm

Standard

GB17761-2018, GB17761-1999, GB24155-2009, ISO4210-2014.

Application

The wading test device meets the technical requirements of the national standard GB17761-2018 " Electric bicycle safety technical specifications ", GB17761-1999 " Electric bicycle safety technical specifications " and GB24155-2009 "Safety Requirements for Electric Motorcycles and Electric Mopeds" . The equipment can be tested indoors in a pool with a water depth of 100 mm. The electric bicycle is driven at a speed of 15 km/h for 500 m or a total travel time of no more than 10 minutes to detect the wading performance of the electric bicycle.

Working conditions

10℃～30℃

Parameters

1,The depth of the wading device is 200mm, and the wading depth mark is 100mm. The water depth is 100mm.There is an automatic water discharge port.The bottom of the device needs a water change switch, and the drainage and water supply pipes are provided.

2,The running section is 16m, the slope section is 1m, the length of the cistern section is 25m, and the width is 1.5m.；

3,The overall material of the wading test device is made of SUS304# stainless steel with good rust and corrosion resistance, good sealing performance, no water seepage and water leakage. It can automatic water discharge when water level, and with water supply and drainage devices.

4,Main configuration:

4.1,Water immersion experimental device 1 set

4.2,Water supply system 1 set

4.3,Drainage system 1 set

iec tester

laboratory test equipment

Stainless Steel Wading Test Device Automatic Drain Depth Of 100mm Images